How to actually install LED Strip Lights

LED Strip Lights are quickly replacing older incandescent lights as the effects lighting of choice for business and homeowners who want to stylishly rethink the way they light their interiors without compromising on quality. Installing them now will mean that you save up to per cent on the running cost of your lighting, which, with large scale installations like those used in pubs, clubs, restaurants and hotels, is very important. What you will find is that each diode on an LED Strip will use about a tenth of the wattage as an equivalent incandescent, which means you will be able to run your lighting very affordably.

They also last considerably longer, up to times longer in fact, with the average life span of an LED being anywhere between , and , hours. One of the defining features of LED Strip Lights is their ease of use. They are made with a user friendly ethos in mind, which see reviews makes them incredibly easy to install. However, there are a few things worth considering before you buy. This article will give some practical advice on ordering LED Strip lights for the first time and getting started.

Take Measurements All LED Strip Lights are made to measure. As such, it is a good idea to measure the space in which you intend to install them. This will make sure you get the right length of LED Strip necessary for the project. Check the Load Determine the power requirement of the LED Strip Lights. This is a variable figure, depending on the length of the light strip, the number of LEDs per strip and the size of the LEDs.

The manufacturer should provide all the specifications you need to help you work out what sort of power source you will need. Always check the specifications of the strip light controller. The controller dictates the performance of the strip light it is connected to. If you have a W controller and your strip light performs at W per metre, then you will be able to run metres of that particular strip light on a single controller. If you need more then you can use an amplifier to boost the signal of the controller.